How to Make Decoupage Waterproof?

Decoupage is a great way to add a personal touch to any project, but sometimes you need it to be waterproof. Whether you’re decoupaging a vase or a piece of furniture, there are some things you can do to make sure your project can withstand the elements. Here are some tips on how to make decoupage waterproof.

  • Select an image and print it out onto a piece of paper
  • Cut out the image, leaving a small border around the edge
  • Apply a layer of decoupage glue to the back of the image
  • Place the image onto your surface and smooth out any bubbles or wrinkles
  • Allow the glue to dry for at least 24 hours
  • Once the glue is dry, apply a layer of clear sealant over top of the image

What Can You Use to Seal Decoupage?

There are a few different things that you can use to seal decoupage, depending on the project that you are working on and the look that you are going for. One option is to use a sealer or varnish designed specifically for decoupage projects. These products will help to protect your project from moisture and wear, and can also give it a nice shine.

You can find these sealers at most craft stores. Another option is to use mod podge. This is a water-based adhesive that can also be used as a sealer.

It’s very easy to use and dries clear, so it’s perfect for sealing decoupage projects. You can find mod podge at most craft stores as well. Finally, you can also just use clear glue or even white glue to seal your decoupage project.

These adhesives will work fine, but they may not be as durable as the other options mentioned above.

Does Mod Podge Make It Waterproof?

Mod Podge does not make it waterproof.

How Do You Seal Outdoor Decoupage?

Decoupage is a great way to add a personal touch to your outdoor living space. You can decoupage almost anything, from furniture to flower pots. One of the best things about decoupage is that it’s easy to do and relatively inexpensive.

Plus, it’s a great way to recycle old items that you might otherwise throw away. When you’re ready to start your project, gather your supplies. You’ll need Mod Podge or another decoupage glue, scissors, sandpaper (optional), a paintbrush, and your images.

If you’re using paper images, make sure they are photocopies or laser prints; regular inkjet prints will run when they get wet. Once you have everything you need, begin by Sanding down any rough edges on your surface if necessary. This will help create a smooth base for your images.

Next, brush a layer of decoupage glue onto the back of your first image. Be sure to use even strokes and avoid getting too much glue on the paper; otherwise it will be difficult to apply evenly to your surface. Carefully place the glued side of the paper onto your project surface and press down gently but firmly.

Continue applying images in this manner until your entire project is covered. Once all of the images are in place, brush over the entire surface with another layer of decoupage glue. This will help protect your work and make it more durable outdoors.

Allow the piece to dry completely before using it or putting it back in its original spot..

Can You Put Polyurethane Over Decoupage?

It is possible to put polyurethane over decoupage, but it is important to make sure that the decoupage is completely dry before doing so. If the decoupage is not completely dry, the polyurethane will not adhere properly and may cause the design to peel off. It is also important to use a clear polyurethane so that it does not alter the color of the decoupage.

How I Waterproof Decoupaged Terra Cotta Pots

How to Make Mod Podge Waterproof

Mod Podge is a decoupage glue that can be used to seal and protect surfaces like wood, fabric, paper, and more. It’s easy to use and relatively inexpensive, making it a popular option for crafters. But what if you want to make your Mod Podge project waterproof?

There are a few different ways to do this. One option is to mix in some clear waterproof sealant before you begin applying the Mod Podge. Another way is to apply several coats of Mod Podge, allowing each coat to dry completely before adding the next.

Finally, you can also brush on a layer of clear waterproof sealer after the Mod Podge has dried. Whichever method you choose, be sure to test it out on a small area first to make sure that it doesn’t affect the appearance of your project. Once you’ve got the hang of it, go ahead and mod podge away!

How to Make Paper Waterproof

Are you looking for a way to make your paper products waterproof? If so, there are several options available to you. You can buy waterproofing sprays or coatings from your local hardware store, or you can try one of the following DIY methods:

1. Use beeswax. Simply melt some beeswax and brush it onto your paper product. The wax will seep into the paper and form a protective coating that will repel water.

2. Make a paste with flour and water. Mix equal parts flour and water together to form a thick paste. Spread the paste onto your paper product and allow it to dry.

The flour will create a barrier that will keep water out. 3. Use hairspray or lacquer. spraying or brushing either of these substances onto your paper will create a waterproof barrier.

Just be sure to use an aerosolator version of hairspray or lacquer, as the aerosolator versions tend to be less harmful to the environment than aerosolator-free versions .

How to Seal Decoupage on Wood

If you’ve ever wanted to decoupage on wood without worrying about the paper peeling off later, then this tutorial is for you! I’m going to show you how to seal decoupage on wood properly so that your project will last for years. What You’ll Need:

-Mod Podge (I prefer the matte finish, but you can use whatever kind you like) -Foam brush -Clear acrylic sealer (optional)

-Paper towels or old rags Step One: Prep Your Surface & Apply Mod Podge The first step is to make sure your surface is clean and free of any dust or debris.

Once it’s clean, apply a layer of Mod Podge to the area where you’ll be applying your paper. Be generous with the Mod Podge – you want there to be a good amount so that it can really adhere to the paper and wood. Use your foam brush to spread it out evenly.

Step Two: Apply Your Paper & More Mod Podge Next, lay down your paper onto the wet Mod Podge and smooth it out with your fingers. Make sure there are no bubbles or wrinkles.

Once the paper is in place, brush another layer of Mod Podge over top of it. Again, be generous – you want there to be a good amount so that everything seals together properly. Step Three: Let It Dry & Add Another Layer (Or Two) of Mod Podge

Let your project dry for at least an hour before moving on to the next step. Once it’s dry, add another layer (or two) of Mod Podge over top of the paper. This will help ensure that everything stays sealed together nicely. Let each layer dry completely before adding another one – otherwise things could get messy! Step Four: Seal It with Clear Acrylic (Optional) If you want an extra level of protection, you can seal your project with clear acrylic sealer once everything has dried completely. Just spray or brush it on according to the directions on the bottle/can and let it dry – easy as that! And that’s all there is to it! Now you know how to seal decoupage on wood properly so that your projects will last for years instead of just a few weeks or months. Give it a try yourself and see how easy and satisfying decoupaging can be!

Is Dishwasher Safe Mod Podge Waterproof

Mod Podge is a decoupage glue that can be used on many different surfaces. It’s easy to use and gives a nice, smooth finish. Mod Podge is dishwasher safe, but it is not waterproof.

If you’re looking for a waterproof option, you can try using clear nail polish or epoxy resin.


If you’re looking for a way to make your decoupage projects last longer and be more durable, then you’ll want to waterproof them. Here’s a quick and easy tutorial on how to do just that. You’ll need:

– A decoupage project that’s been sealed with Mod Podge (or another similar sealant) – A can of clear polyurethane spray paint – Newspaper or a drop cloth (optional)

Step 1: Prep Your Workspace Before you start spraying, you’ll want to make sure that your workspace is well ventilated and that you’re using newspaper or a drop cloth to protect surfaces from overspray. If it’s nice outside, consider taking your project outdoors so that you don’t have to worry about the fumes.

Daniel Smith

Welcome to the waterproof talk blog, I'm Daniel Smith. I faced a lot of water damage and downpours throughout my life, and I've had my fair share of soaking, too. I began waterproofing items when I relocated to Ireland. Now, I share what I've learned about waterproofing and answer your waterproofing related questions.

Recent Posts