How to Fix Dry Waterproof Mascara?

If you’re like me, you have at least one tube of waterproof mascara that’s starting to dry out. And while there are a few ways to get more mileage out of it (like using an eyelash curler), eventually you’ll need to replace it. But before you do, try this little hack to bring it back to life.

  • If your waterproof mascara has become dry, you can try to fix it by adding a few drops of saline solution or contact lens solution to the tube
  • Shake the tube well to mix the solution and help re-wet the mascara
  • You can also try heating up the tube for a few seconds with a hair dryer set on low heat
  • This will help soften the dried product so that it is easier to apply
  • Be sure to test the temperature of the tube before applying it to your lashes, as you don’t want to end up burning yourself

How Do You Moisten Waterproof Mascara?

If you’re like most people, you probably have a go-to mascara that you love. But what happens when that mascara starts to dry out and gets clumpy? You may be tempted to throw it away and buy a new one, but there’s no need to waste your money!

With a little bit of know-how, you can easily moisten waterproof mascara and make it last longer. The first step is to identify the problem. If your mascara is starting to dry out, it will likely become clumpier and less effective at lengthening and volumizing your lashes.

The good news is that this is an easy problem to fix! There are a few different ways to moisten waterproof mascara. One option is to add a few drops of saline solution or contact lens solution to the bottle.

Another option is to soak a cotton ball in water and then squeeze out the excess before running it over the outside of the tube. This will help rehydrate the formula inside. Once you’ve added moisture back into the mix, give the bottle a good shake and test it out on your lashes.

You’ll be amazed at how much better it works!

How Do I Fix Waterproof Clumpy Mascara?

If you’re anything like me, you love a good waterproof mascara. There’s nothing quite like it for giving your lashes that extra bit of oomph and definition – not to mention, it’s perfect for those days when you just know there’s a chance your makeup might get a little bit wet (hello, summer!). However, as much as we love our waterproof mascaras, they can sometimes be a little tricky to work with.

One of the most common issues is that they can often end up looking clumpy – not exactly the look we’re going for! So, if you’re struggling with clumpy waterproof mascara, here are a few tips to help you get it under control: 1. Start with clean lashes.

This might seem like an obvious one, but if your lashes are already coated in old mascara or dirt, it’s going to be much harder to get a nice, even coat of new mascara on top. So make sure to start with clean lashes by gently wiping them with some micellar water on a cotton pad. 2. Invest in a good quality waterproof mascara.

Cheap drugstore mascaras might be tempting, but they’re often not worth it in the long run – especially when it comes to waterproof formulas. A high-quality waterproof mascara will go on much more evenly and won’t clump as easily as a cheaper option. Trust me, it’s worth splurging on!

3. Use an eyelash curler before applying your mascara. Curling your lashes before applying mascara will help them hold the curl better and prevent any unwanted drooping throughout the day (or night). Plus, it’ll also help create more space between each lash so that your mascara has somewhere to go without making things too clumpy.

Simply squeeze your lash curler at the base of your upper lashes and hold for 10 seconds before moving up towards the tips of your lashes and holding for another 10 seconds. Repeat on both sides and then move on to applying your mascara! 4 .

Apply less than you think you need . It can be tempting to layer on loads of coats when using waterproof formulas since they can be difficult to build up – but resist the urge! Applying multiple coats will only make things worse by increasing the chances of clumping (plus, who really needs that much anyway?).

FIX DRIED MASCARA TUTORIAL | Life Hack for Fixing Dry Mascara Easily | Mascara Tips + Tricks

How to Liquify Dried Mascara

If you’ve ever found yourself in a situation where your mascaras dried up before you could finish using them, you know how frustrating it can be. Fortunately, there is a way to bring them back to life! All you need is a little heat and some moisture.

Here’s how to liquify dried mascara: 1. Start by running the tube of mascara under warm water for a few seconds. This will help soften the product inside.

2. Next, place the tube in a cup of hot water for about 5 minutes. Again, this will further help soften the product. 3. Finally, add a few drops of saline solution or contact lens solution into the tube and screw the cap back on tightly.

Shake well and voila – your mascara is good as new!

How to Fix Dried Mascara Without Eye Drops

Dried mascara is a pain to deal with. It can make your eyes look tired and can be difficult to remove. But there are a few things you can do to fix dried mascara without using eye drops.

First, try using a damp cotton ball or Q-tip to gently remove the dried mascara. If that doesn’t work, you can try using a little bit of olive oil or coconut oil on a cotton ball to help break down the makeup. Once you’ve removed as much of the dried mascara as possible, it’s time to focus on rehydrating your lashes.

You can do this by applying a hydrating serum or oil to your lashes before bedtime. This will help keep your lashes healthy and prevent them from drying out in the future.

Brand New Mascara is Dry

If you’re anything like me, you love trying out new makeup products as soon as they hit the shelves. So when I saw that a new mascara was being released, I couldn’t wait to get my hands on it. Unfortunately, when I did finally try it out, I was disappointed to find that it was dry and clumpy.

It’s such a bummer when you’re excited about a new product only to find that it doesn’t live up to your expectations. If you’re in the same boat with this new mascara, don’t despair! There are a few things you can do to fix the problem.

First, make sure that you’re not accidentally using an old or expired mascara. That can definitely cause drying and clumping. If that’s not the issue, then try running the wand under warm water for a few seconds before applying.

This will help loosen up the formula so that it goes on more smoothly. Finally, if all else fails, reach out to the company and let them know about your experience. They may be able to send you a replacement or refund your purchase entirely.

Have you tried this new mascara? What did you think of it?

How to Fix Dry Mascara With Micellar Water

If you’ve ever found your mascara looking a little dry, there’s an easy fix! All you need is some micellar water. Micellar water is great for removing makeup, and it can also help rehydrate your mascara.

Simply add a few drops to your mascara tube and shake well. You’ll see the difference right away – your mascara will look good as new!


If you’re mascara is starting to dry out, there are a few things you can do to try and fix it. First, if the mascara is relatively new, you can try adding a few drops of saline solution to the container and shaking it up. This will help re-wet the formula and make it easier to apply.

If that doesn’t work, or if your mascara is older, you can try using an oil-based makeup remover on a cotton ball to remove any build-up on the wand. This will help get the product flowing again. Finally, if all else fails, you can always buy a new tube!

Daniel Smith

Welcome to the waterproof talk blog, I'm Daniel Smith. I faced a lot of water damage and downpours throughout my life, and I've had my fair share of soaking, too. I began waterproofing items when I relocated to Ireland. Now, I share what I've learned about waterproofing and answer your waterproofing related questions.

Recent Posts